Setting the Time
Turn the crown of your watch clockwise approximately 25 revolutions to ensure a full wind
When the seconds hand reaches the 12 o'clock position pull out the crown to position 2
If your watch has a date, rotate the crown counter-clockwise until a date change occurs to establish midnight
Continue turning the crown counter-clockwise until you set current time + 1 minute
Use a reference clock and wait until real time matches the time on your watch. Push the crown into position 0
Setting the Moon Phase
Pull the crown out to the designated position to begin adjusting the moon phase indicator
Rotate the crown to advance the moon disk until the moon is perfectly centered in the aperture (Full Moon position)
Check the current lunar calendar and turn the crown to advance the disk by the exact number of days since the last full moon
Push the crown firmly back into position 0 to lock the moon phase display and restart the movement
Setting the Date
Pull the crown out to the first position to engage the date adjustment mechanism.
Turn the crown counter-clockwise to advance the calendar until it displays the date of the previous day.
Pull the crown to the second position and advance the hands past midnight until the correct current date and AM/PM time are established.
Push the crown firmly back into position 0 to protect the movement and secure water resistance.
Operating Chronograph
Press the upper pusher (at 2 o'clock) to start the chronograph seconds hand and begin timing.
Press the upper pusher again to stop the timing, allowing you to read the elapsed seconds and minutes.
Press the upper pusher once more if you wish to resume timing from the exact position where it was stopped.
Press the upper pusher a final time to lock the measured interval securely before resetting.
Press the lower pusher (at 4 o'clock) while the chronograph is stopped to instantly reset all sub-dials and the seconds hand back to zero.